In TWINOVA mode, the keyboard will be divided into two areas with
the same pitch and voice.
1.
Turn the TWINOVA on/off.
Press and hold the [SHIFT] button, then press the [TWINOVA]
button to enter the TWINOVA mode, and the nixie tube currently
displays “on”. Repeat above button operations to exit TWINOVA
mode, and the nixie tube currently displays “oFF”. In the TWINOVA
mode, DUAL and SPLIT are unavailable, the default split point is
E3 (32).
2.
Select voice.
Before entering the TWINOVA mode, the default voice of right-hand
and left-hand is the upper voice you select. You can use the VOICE
select buttons or the data dial or [+/YES]/[-/NO] button to select a
desired voice.
3.
Set the split point.
In the TWINOVA mode, press and hold the [LOWER] button, then
tap keys from C3~C6 to set the split point of TWINOVA. Release
[LOWER] button to exit the split point setting mode.
4.
Set the octave.
In the TWINOVA mode, press and hold the [SHIFT] button, then
press the key marked /- to set octave value of the
TWINOVA, and the nixie tube currently displays the octave value,
such as “1”.
Note:
In the song playing mode, the TWINOVA is invalid.
This function is used to turn on or turn off the prompt tone. The default
setting is turn on.
Operation:
Press and hold the [SHIFT] button, then press the key marked BEEP
key to turn the beep tone on or off.
24
TWINOVA
Beep Tone
Default Split Point
：
E3
（
32
）
OCTAVE
BEEP
7
8
0
1
2
3
4
5
6
MIDI
9
C
M
Y
CM
MY
CY
CMY
K
aw_SP5300_Manual_G03_170426.pdf 24 17/4/26 10:16
