Now the three
tremolo springs (7)
can be fitted. To stretch the springs to the right length for
mounting, hang the springs with the hook in the tremolo block and draw the spring with the help of a
screwdriver until the round opening of the spring can be hooked on the spring claw (see picture). If
necessary, the mounting screws of the spring claw can be loosened a little to make it easier to install
the springs.
Step 4: Wiring and mounting the output jack socket
To connect the
output jack (14)
with the pre-wired electrics of the ST-style electric guitar, only the
two contacts of the output jack have to be soldered. The connecting cables required for this are
already routed into the milling provided in the body, whereby the yellow signal cable must be
connected to the tip contact and the black earth cable to the sleeve contact of the socket (see
illustration).
Once both contacts are soldered to the intended terminal, screw the output socket into the recess on
the body using the two screw tabs of the
socket mount (14c)
and the
matching screws (3b).
ENGLISH
