background image

Scope of Delivery 

The following parts are included in the Fame DIY kit ST-Style: 

1. 1x Body, pre-drilled

2. 1x Maple neck, with fretboard and nut

3. Electronics (prewired):

a. 1x Pickguard, 3-play W/B/W

b. 19x Mounting screws, 12.3 mm

c. 1x Single-coil neck

d. 1x Single-coil middle

e. 1x Single-coil bridge

f. 6x Pickup screw

g. 6x Pickup spring

h. 1x Volume potentiometer 250K log.

i. 2x Tone potentiometer 250K lin.

j. 1x Volume knob, white

k. 2x  Tone knob, white

l. 2x Capacitor, 47 nF

m. 1x Pickup switch, 5-Way

4. Vintage-Tremolo (pre-installed):

a. 1x Block

b. 1x Base plate, Chrome

c. 3x Mounting screw (block and base

plate)

d. 6x String saddle (saddle,

spring,   screw, 2x grub screw)

5. 1x Tremolo spring claw

6. 2x Mounting screws for spring claw, 35.3 mm

7. 3x Tremolo springs

8. 6x Mounting screws for bridge, 27.8 mm

9. 1x Tremolo arm, with white cap

10. 1x Cover plate tremolo compartment, white

11.

6x Die-cast tuners, chrome

a. 6x Lock nut for tuner

b. 6x Washer for tuner

c. 6x Mounting screw for tuner,

11.7mm

12. 2x Butterfly string guides

a. 1x Mounting screw, 11.7mm

b. 1x Mounting screw, 13.7mm

c. 1x Mounting sleeve, short

d. 1x Mounting sleeve, long

13. 1x Neck cover plate, chrome

a. 1x Base for neck cover plate

b. 4x Neck screws, 46.2mm

14. 1x Output socket (preinstalled)

a. 1x Fastening nut

b. 1x Lock nut

c. 1x Socket mount, chrome

15. 2x Strap pin, chrome

a. 2x Rubber washers

b. 2x Mounting screw, 25.3 mm

16. Solder

17. 1x String set

18. 1x Instrument cable

19. 1x Allen key, large

20. 1x Allen key, small

Summary of Contents for DIY-Kit ST-Style
















Reviews: