WARNING:
the OEM must ensure that the FCC labeling requirements are met. This includes a clearly visible label
on the outside of the OEM enclosure specifying the appropriate MikroTik OEM RF Module FCC identifier for this
product as well as any other required FCC notices as presented below.
Contains FCC ID: TV7RB922-5HPACTM
This enclosed device complies with 47CFR paragraph 15 C of the FCC rules and regulations. Operation is subject
to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause undesired operation.
Labeling and text information should be of a size of type large enough to be readily legible, consistent with the
dimensions of the equipment and the label.
Industry Canada
IC:7442A-9225HPACT
This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following
two conditions: (1) this device may not cause interference, and (2) this device must accept any interference,
including interference that may cause undesired operation of the device.
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence.
L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2)
l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en
compromettre le fonctionnement.
LE-LAN device restriction
LE-LAN devices are restricted to indoor operation only in the band 5150-5250 MHz. However, original equipment
manufacturer (OEM) devices, which are installed in vehicles by vehicles manufacturers, are permitted;
Users should also be advised that high-power radars are allocated as primary users (i.e. priority users) of the
bands 5250-5350 MHz and 5650-5850 MHz and that these radars could cause interference and/or damage to LE-
LAN devices.
les dispositifs fonctionnant dans la bande de 5 150 ą 5 250 MHz sont réservés uniquement pour une utilisation ą
l'intérieur afin de réduire les risques de brouillage préjudiciable aux systčmes de satellites mobiles utilisant les
mźmes canaux
Les utilisateurs devraient aussi źtre avisés, d’une part, que les utilisateurs de radars de haute puissance sont
désignés utilisateurs principaux (c.-ą-d., qu'ils ont la priorité) des bandes de 5 250 ą 5 350 MHz et de 5 650 ą 5 850
MHz et, d’autre part, que ces radars pourraient causer du brouillage et/ou des dommages aux dispositifs de RL-EL
IMPORTANT: Exposure to Radio Frequency Radiation.
This equipment complies with the IC radiation exposure limits set forth for an uncontrolled environment. This
equipment should be installed and operated with a minimum distance of 240 cm between the radiator and any part
of your body.
Cet équipement est conforme aux limites d'exposition au rayonnement IC définies pour un environnement non
contrôlé. Cet équipement doit être installé et utilisé à une distance minimale de 240 cm entre le radiateur et toute
partie de votre corps.
CAN ICES-3 (B)/NMB-3(B)FCC
See mikrotik.com/products for the latest version of this document.
Page 7, Document #52261 Modified on: 25.SEP.2019