Mounting
The Netbox 5 is designed to be used outdoors and mounted on pole or DIN rail.
When mounting, please ensure that cable feed is pointing downwards.
The IP rating scale of this device is IP54. We recommend using Cat6 shielded cables.
Warning! This equipment should be installed and operated with a minimum distance of 240 cm between
the device and your body. Operation of this equipment in the residential environment could cause radio
interference.
Mounting and configuration of this device should be done by a qualified person.
Mounting on the pole
The Mounting hose clamp is provided with the package.
1. Guide hose clamp through the opening on the
back of the device and attach it to the mast.
2. Align and secure with hose clamp screw using
PH2 screwdriver.
3. The device should be always placed by TOP cover
facing upwards.
4. Connect your antenna.
* Antenna is no provided with the device only for
illustration purposes.
Grounding
The installation infrastructure (towers and masts),
must be properly grounded.
Please secure all loose Ethernet cables and
antenna cables to the pole or mast approximately
at 30cm from the device, so that the cable weight
is not pulling the ports and connectors.
Mounting using DIN rail
When mounting on DIN rail, please find special bracket in the package and secure it with four screws to the back of
the unit. With attached mounting bracket you will be able to slide the device on the DIN rail.
See mikrotik.com/products for the latest version of this document.
Page 3, Document #52261 Modified on: 25.SEP.2019