Front status LED behavior
Default factory configuration for this device:
1. Solid Blue – The device is powered on.
2. Solid Green – User-defined LED.
3. Solid Green – Active Ethernet port.
4. 8. Solid Green – The set of five green LEDs, shows the signal strength.
Configuration
We recommend clicking the “Check for updates” button in the QuickSet menu, as updating your RouterOS
software to the latest version ensures the best performance and stability. Please make sure you have
selected the country where the device will be used, to conform with local regulations.
For recovery purposes, it is possible to boot the device for reinstallation, see section
Buttons and Jumpers
.
Reset button
The reset button has three functions:
•
Hold this button during boot time until LED light starts flashing, release the button to reset RouterOS
configuration (total 5 seconds).
•
Keep holding for 5 more seconds, LED turns solid, release now to turn on CAP mode. The device will now
look for a CAPsMAN server (total 10 seconds).
•
Or Keep holding the button for 5 more seconds until LED turns off, then release it to make the
RouterBOARD look for Netinstall servers (total 15 seconds).
Regardless of the above option used, the system will load the backup RouterBOOT loader if the button is pressed
before power is applied to the device. Useful for RouterBOOT debugging and recovery.
Accessories
Package includes the following accessories that come with the device:
•
EU/US Switching Power Supply 24 V DC
⎓
, 0.8 A, 19.2 W.
•
Hose clamp 40/60 w2 A2 9 mm.
•
2pcs - Plastic tie strap fastener (300 mm(L) 7,6 mm(W)).
•
Gigabit POE injector cable with shielded connector (RBGPOE).
•
K-27 din-rail bracket mounting set.
See mikrotik.com/products for the latest version of this document.
Page 4, Document #52261 Modified on: 25.SEP.2019
RouterOS allows configuring each LEDs activity the way that user wishes. It is possible to configure the LEDs to
display wireless strength, blink the LEDs on interface traffic activity and many other options.
For further information
please visit
mikrotik
>
wiki/Manual:System/LEDS
RouterOS includes many configuration options in addition to what is described in this document. We suggest
starting here to get yourself accustomed to the possibilities:
mt.lv/help
. In case IP connection is not available,the
Winbox tool (
mt.lv/winbox
) can be used to connect to the MAC address of the device from the LAN side(all
access is blocked from the Internet port by default). Seek additional help from your local trainers or become a
trainer of yourself.
mikrotik.com/training/about