background image

User Manual 

Securope Tempo 
 
 

3.

 

Use of the system  

Maximal number of users per 

system 

(

For other cases please contact 

Fallprotec)

 

The connection and disconnection to the system must 
always be carried out in an area without any risk of a fall. 

1

 

Introduce the mobile anchorage device on the Lifeline in 
case it is not a captive one.

 

2

 

The user moves smoothly all along the lifeline without 

running.

 

3

 

The carabiner of the lanyard must be fixed directly to the 

mobile anchorage device. **

 

5

 

To exit from the system (if the device is not openable), 

the user must take it out at the end of the line with 

through a tilting end stop. (If the glider is openable and 

reachable, it should be stored in a dry place) 

** If the system has no intermediate anchors, user can 
connect directly to the lifeline with a carabiner.

 It must have 

the following characteristics: twist lock type in zinc plated 
steel, according to EN 362 / ANSI/ASSEZ359.12 , length 105 
mm, width 58 mm, section of 10 mm, opening 20 mm, 
breaking strength 23 kN 

 

3.1.

 

 Gliders 

The user can walk as far from the line as his/her lanyard  and the system itself allow it. 
The glider by gravity takes the correct position to pass over the intermediate anchors without 
needing any additional manual action. 

 

 

 

LDV001 

LDV111 

LDV001 

LDV075 

30°- 90° 

Summary of Contents for Securope Tempo














Reviews: