40
Programming the vehicle’s functions
EN
Max. speed (adjustable via a digital center):
That value specifies how high the speed signal transmitted to the motor
should be whenever the decoder emits driving step 28.
Normal speed:
This is the speed up to which the vehicle accelerates after being switched
on or after a stop.
Slow speed:
This is the speed down to which the vehicle slows down whenever the mag-
netic field sensor detects a south magnetic field.
Waiting times:
They indicate, in 0.5 second steps, how long the decoder will wait before
emitting the corresponding instruction.
Switching magnetic sensor off after detection of field green:
Specifies the period of time, in 0.1 second steps, during which the sensor will
disregard any other magnetic field, in order to prevent any sudden slowing
down following the passage above a slowing-down stop point.
Switching magnetic sensor off after detection of field red:
Specifies the period of time, in 0.1 second steps, during which the sensor
will disregard any other magnetic field, in order to prevent any undesirable
slow driving following the start from a stop point.
Reset:
That instruction sets back the decoder to its default factory settings.
Summary of Contents for Car System Digital 3.0
Page 50: ...50 Notizen Notes EN 11 Notizen Notes ...
Page 51: ...51 Notizen Notes EN ...
