21
3.12 USING THE OVEN QUICK START
3.12.1
Before plugging in:
3.12.2
Check the appliance is free from damage.
3.12.3
Ensure the Trolley is on a flat surface and the brakes have been applied.
3.12.4
Ensure all shelves and dividers are in position.
3.12.5
To turn the appliance on, plug the trolley into a mains supply and carry out the
following operation:
Refer to section 2.1 for dual supply trolley (F2HH) instructions.
3.12.6
Turn on mains power supply on.
The appliance comes with an automatic self-check procedure (if configured in
MANAGERS MENU) . When appliance is switched on, it will cycle through the
self-check when first attached to mains supply (Once per day). This checks
elements, compressor, hotplate, buzzer,
and cycles through WRGB LED’s on
the Gantry to ensure all working within designated parameters.
3.12.7
Check what mode the unit is in; this is displayed on the info bar on the bottom
of the screen. See below - text circled in yellow is an example of manual
mode. There are three options manual, semi-automatic and automatic modes.
When using manual mode, please ensure the oven has been pre-heated to a
sufficient temperature.
3.12.8
See section 4.10 to set Pre-heat temperatures under the
“MANAGERS /
TEMPERATURE MENU
”
Settings.
3.12.9
Activate Pre-Heat See section 3.8.
3.12.10
Once pre-heat is complete to activate Cook see section 3.7.