10
WHEN PLUGGING IN
2.1 DUAL SUPPLY & RCD REQUIREMENTS
Warning: On dual supply models do not plug both supplies into
adaptor, extension lead or 1x13amp double socket. Ensure both
supplies are separate.
We recommend supplementary electrical protection with the use
of a 30mA residual current device (RCD)
Before and after each use, it is good practice to inspect your appliance for any
signs of physical damage
– should you find anything, please report this to the
appropriate onsite person who will then take the necessary action.
As a minimum, we would also advise that the appliance cable & plug are
inspected daily. Check for damage to the plug housing, pins and the mains cable
is secured to plug with no wires showing.
When checking the plug and cable the wall socket should also be inspected for
damage, discoloration or cracks. If there is any damage to the plug, mains cable
or socket the appliance MUST NOT be used and it should be reported
immediately to the maintenance team/ responsible person, who should then
notify the Technical Care Team.
Never plug both supplies into an adaptor, extension lead or a standard 13A
double socket. Always ensure both supplies are separate. Do not plug any other
appliance along with this appliance into a double socket.
Only use Falcon approved spare parts, including 13A plug.
For more information on maintaining your appliance scan the QR code below.
Only use with Falcon-
approved parts, including
plug(s) and accessories.