43
UPS History
UPS History Log
This page gives a snap-shot of all the fundamental UPS parameters.
Consolidation interval can be changed by the Administrator by modifying the variable "History
Log Interval" in "USHA Configuration" page.
The existing values are overwritten when the maximum number of entries (rows) has been
reached. You can clear the log data in "Clear & Save Log Data" menu.
Log Date
This column show the date on which the recording was made.
Log Time
This gives the time in a 24-hour format when the values were recorded.
Input Voltage
This shows the input voltage in Volts at the time of recording.
Output Voltage
This shows the output voltage in Volts at the time of recording.
Output Current
This shows the output current in Amps at the time of recording.
Output Power
This shows the output power in KW at the time of recording.
Input Frequency
This shows the input frequency in Hertz at the time of recording.
Output Load
This show the load on the UPS in terms of percentage at the time of recording.
Battery Capacity
The remaining battery capacity expressed in percent of full capacity.
UPS Temperature
This shows the temperature of the UPS battery in
o
C at the time of recording.
EMD Temperature
