Falcon telecom SP-BT-POC, Manual

Page: 20 / 24

on/off” button for three second until the di tone to switch Bluetooth microphone back
to cell phone.
5) Last number redial: Quick double press “power on/off” Button then the Mobile phone
will dial out the last call out number.
Note: Last number redial function requires the mobile phone support)
PTT talking
1) This function need to pair with Bluetooth Adapter and serve as PTT button to provide
wireless communication.
2) Pair the Bluetooth Speaker Mic with Bluetooth Adapter.
3) After successfully paired, press PTT button to communicate with other two way radio.
4) If you want to terminate the conversation to other function, you need to switch off
the Speaker Mic and Adapter first and switch on Speaker Mic for other function such as
connection with mobile phone
Stereo music play control and Volume control
1) Play forward: Short press Vol+ Button to select next music.
2) Play backward: Short press Vol- Button to select previous music or song playback.
(Note: The above function requires the mobile phone supports Bluetooth A2DP and
AVRCP.
3) Press “power on/off” button to play/pause music.
(Note: The above function requires the mobile phone supports Bluetooth A2DP and
AVRCP).
Voice control for Speaker Mic
When listening to music or answering the phone call, press the Vol “+” or Vol “-”to increa -
se the volume or decrease the volume. There’s “di”tone to indicator the voice volume to
get it max or min volume..
FAQs
Can not power on
It might low battery, please try again after charging for 3 hours, then reset the speaker-
mic and try again.
No sound
Please check if the speaker mic have connected to the device or the volume too low.
Speakers have feedback sound during direct intercom
The speaker volume tuned too much high, or the distance between two intercom user is
too much close
Disconnect with mobile phone, BT Adapter/dongle, or GPS
Low battery, distance between the speaker mic and mobile phone more than 10m, or
obstacles exist between Bluetooth devices that can absorb frequency signals like metals
or water might cause disconnection between Bluetooth devices.
Can’t pair with mobile phone
Clear all the pairing information according to user manual, and then put the speaker-mic