3
Installation:
Clock Video Camera (Model #TCM-30)
1.
Power by DC power of the Clock video camera.
2.
Position the video camera in the desired location.
NOTE: The transmission range of the Clock video camera at open side up to 150 ft. Real
distance is depends on its operating environment. If you are receiving poor video images from
the camera, try shortening the transmission range. Reposition and/or adjust the Clock video
camera if video transmission is being degraded by obstructions in its operating environment.
3.
Select the desired transmission channel for the Clock video camera.
NOTE: The Model #TCM-30 Clock video camera has four (4) different transmission channels.
The Clock video camera has been set to transmit on CH 1 at the factory. Do not set and/or use
more than one (1) video camera on the same transmission channel in order to prevent signal
interference and unclear picture reception.
4.
Cnnect the AC Power Adaptor Jack end to the DC Input Jack end of the Clock Video camera.
5.
Plug the AC Power Adaptor into a standard 120V AC electrical outlet.
6.
Unplug the AC Power Adaptor from the electrical outlet when it is not in use or is left
unattended.
Receiver (Model #VSB8RX):
CAUTION: Make all of the necessary wire jack connections before plugging the AC Power
Adaptor into an electrical outlet, as a risk of electrical shock may exist. Keep away from water,
fire raindrop and high humidity
1.
Insert the 3.5Ø cable plug into the Video out Jack of the receiver.
2. Insert the (yellow) cable plugs into the Video Input Jack of your TV, as appropriate.
2.4GHz
Receiver
(VSB8RX)
Yellow
Plug
Video Cable
TV
Video
Input
Jack
3.5 Plug
Wireless Video
Camera in the Clock
