SSG1.5KRM-X Internal Battery Pack Replacement
1
.
Loosen and remove the screws on the left hand front panel. Remove the panel from the
unit.
2.
Lay the panel aside for reassembly.
3.
Loosen and remove the screws of battery stop plate. Lay them aside for reassembly.
4.
Grasp the battery pack, and pull it out of the front of the unit. Mark the top of the
pack.
5.
Unpack the new battery pack. Take care not to destroy the packaging. Compare new and
old battery packs and verify that they are the same type. If so, proceed with the next step,
otherwise stop and contact Falcon Service.
6.
Line up and slide in the new replacement battery pack in the correct orientation, by
referring to the mark on the original battery pack.
7.
Gently push the battery pack back into the cabinet. Ensure it is tightly seated into the
unit.
8.
Reinstall the battery stop plate with the screws originally removed.
9.
Reinstall the front panel to the unit with the screws originally removed.
29
