9
OPERATOR WARNINGS
(CONTINUED)
Slip-In Units Continued
WARNING: DUE TO THE WEIGHT OF THE SHOVELING APRON, USE FORK TRUCK
TO LIFT AND LOWER ONTO PATCHER OR SERIOUS INJURY COULD OCCUR.
CAUTION: DO NOT ATTEMPT TO TRANSPORT SLIP-IN UNIT WITH A FORK TRUCK
WITHOUT USING FORK POCKETS.
Hydraulic Operated Units
WARNING: PRIOR TO OPENING HYDRAULIC LOADING DOORS, MAKE SURE
THERE IS CLEARANCE ABOVE AND AROUND THE ENTIRE PERIMETER OF THE
PATCHER WHILE LOADING DOORS ARE OPEN/OPENING.
WARNING: TO PREVENT SERIOUS INJURY AND TO PREVENT DAMAGE TO THE
ASPHALT HOT PATCHER AND TOW VEHICLE, IT IS ESSENTIAL THAT A QUALIFIED
HYDRAULICS TECHNICIAN PERFORM HYDRAULIC CONNECTIONS AND
ADJUSTMENTS.
CAUTION: TO AVOID SERIOUS INJURY, DO NOT PUT HANDS NEAR HYDRAULIC
MATERIAL DOOR WHEN LIFTING OR LOWERING.
Tack Tanks
WARNING: ALLOW TACK MATERIAL TO COOL BEFORE REMOVING EXCESS TACK
FROM THE TANK AT THE END OF THE DAY.
CAUTION: NEVER FILL THE TOP CYLINDER OF THE TACK TANK WITH TACK
MATERIAL.
NOTICE: DO NOT SPRAY TACK MATERIAL THROUGH SPRAY SYSTEM UNLESS IT
HAS BEEN DILUTED ACCORDING TO MANUFACTURER'S DIRECTIONS.
INSUFFICIENTLY DILUTED TACK MATERIAL SPRAYED THROUGH THE SPRAY
SYSTEM WILL CAUSE THE SPRAY SYSTEM TO FAIL.
NOTICE: FAILURE TO PERFORM SPRAY SYSTEM FLUSH PROCEDURE AFTER
EACH USE WILL CAUSE THE SPRAY SYSTEM COMPONENTS TO FAIL.
