INSTALLATION
Check the appliance is electrically safe and gas sound when you have finished.
28
To set the front turn the feet bases to raise or lower.
Fitting the Stability Bracket and
Chain
n
A stability bracket and chain MUST be fitted when
the cooker is connected to a flexible gas supply.
Unless properly installed, the cooker could be tipped by
leaning on the door. Injury might result from spilled hot
liquids or from the cooker itself.
IMPORTANT
: The cooker must be set to the correct height
and levelled before the stability bracket is installed.
Fitting a Stability Bracket
When fitting a stability bracket please refer to the instructions
supplied with the bracket for further details on fitting.
When fitting a stability bracket; first attach the bracket
location device to the rear of the cooker (
Fig. 9.6
). Then
adjust the bracket to engage through the slot of the device
(
Fig. 9.7
and
Fig. 9.8
)
Fitting the Restraining Chain
The restraining chain
MUST
be fitted.
The length of chain between the appliance and the wall fixing
should prevent strain on the gas and electricity connections,
but still allow access to unhook the chain when the cooker is
pulled forward.
Measure the length of chain required. Use the clamp supplied
to clamp onto the gas pipe (
Fig. 9.9
). Fix the supplied hook
securely to the wall.
Repositioning the Cooker
Following Connection
If you need to move the cooker once it has been connected
then you need to unplug it and, having gripped under the
fascia panel and lifted the front of the cooker slightly
(
Fig. 9.5
), you need to check behind the cooker to make sure
that the gas hose is not caught.
As you progress, make sure that both the electricity cable and
gas hose always have sufficient slack to allow the cooker to
move.
With a stability chain fitted, release it as you ease the cooker
out. Do not forget to refit it when you replace the cooker.
ArtNo.070-0014 - Stability bracket - Wall fitting
Cooker
Stability
bracket
Floor
Stability
location
bracket
Wall
Typical wall mounting
Alternative positions
for stability location
bracket
ArtNo.070-0014 - Stability bracket - Wall fitting
Cooker
Stability bracket
Floor
Stability
location
bracket
Typical floor mounting
Fig. 9.6
Fig. 9.7
Fig. 9.8
Fig. 9.9
ArtNo.011-0007 - Restraining chain (AUS)
Restraining
chain
Caution, possibility of tilting
Anti-tip restraints
