2
•
Always keep combustible materials, e.g.
curtains, and flammable liquids a safe
distance away from the cooker.
•
DO NOT
spray aerosols in the vicinity of
the cooker while it is on.
Electrical Connection Safety
n
WARNING:
THE APPLIANCE MUST BE
EARTHED.
The cooker is preset for a single-phase earthed
electrical connection. It is essential to install
a multi-pole circuit breaker that completely
disconnects the appliance from the mains, with
a minimum contact break distance of 3 mm.
See the ‘Technical Data’ section for information
on the total electrical load of the appliance.
The cable size used should be suitable for this
load and comply with all local requirements
(i.e. PVC Insulated cable IEC 60227 – code 53 for
ordinary cables).
Minimum temperature rating T105.
Read the instructions before installing or using
this appliance.
Gas connection safety
•
This cooker is a Class 2 Subclass 1
appliance.
•
This appliance can be converted for use on
another gas.
•
Before installation, make sure that the
cooker is suitable for your gas type and
supply voltage. See the data badge.
•
DO NOT
use reconditioned or
unauthorised gas controls.
•
Disconnect from the electricity and gas
supply before servicing.
•
When servicing or replacing gas-carrying
components disconnect from the
gas supply before starting operation.
Check the appliance is gas sound after
completion.
•
Make sure that the gas supply is turned
on and that the cooker is wired in and
switched on.
•
In your own interest and that of safety, it is
law that all gas appliances be installed by a
qualified person(s).
•
An appliance for use on LPG must not be
installed in a room or internal space below
ground level, e.g. in a basement.
If you smell gas
•
DO NOT
turn electric switches on or off
•
DO NOT
smoke
•
DO NOT
use naked flames
•
Turn off the gas at the meter or cylinder
•
Open doors and windows to get rid of the
gas
•
Keep people away from the area affected
•
Call your gas supplier
Peculiar smells
When you first use your cooker it may give off
an odour. This should stop after use.
Before using for the first time, make sure that
all packing materials have been removed and
then, to dispel manufacturing odours, turn the
ovens to 200 °C and run for at least an hour.
Make sure the room is well ventilated to the
outside air (see ‘Ventilation’ below). People with
respiratory or allergy problems should vacate
the area for this brief period.
Cooling fan
This appliance has a cooling fan. When the
oven is in operation the fan will run to cool the
fascia and control knobs.
