51
WARNING - SERVICING TO BE CARRIED OUT ONLY BY AN AUTHORISED PERSON
Disconnect from electricity and gas before servicing. Check appliance is safe when you have finished.
22. To Remove the LH Oven Bottom and Top Elements
Disconnect from the electricity supply.
Bottom Element
Pull the cooker forward to access the cover boxes at the
rear of the unit. Remove the fixings that secure the cover
and lift it clear.
Remove the 2 screws ‘A’ and allow the plate to drop
down. Remove the 2 screws B, lower the upper plate and
remove through the slot in the cooker back.
Undo the terminal connections, noting their positions.
Remove the element fixings and withdraw element.
Replace the element and re-assemble parts in reverse
order.
Top Element
Open the LH oven door and undo the fixings that secure
the heat shield. Remove the top element bracket fixings
and withdraw element. Replace the element and re-
assemble parts in reverse order. Check that the oven
operates satisfactorily.
23. To change oven light bulb.
Turn off the power supply.
Make sure the oven is cool. Open the oven door and
remove the oven shelves.
Unscrew the bulb cover by turning anticlockwise. It may
be very stiff.
Taking care to protect your fingers in case the bulb
should shatter, unscrew the old bulb.
Fit an Edison screw fitting 15W 240V lamp, FOR OVENS. It
must be a special bulb, heat resistant to 300°C.
Screw in the new bulb, screw back the bulb cover. Turn
on the electricity supply and check that the bulb now
lights.