
The Pima serial interface will send the standard FSK Contact ID
alarm codes.
DSC NEO SERIAL INTERFACE
Set the serial port format to DSC PowerSeries Neo on the Falcon
Fusion (
Refer to Section 3.4).
The Falcon Fusion can send
alarms received from the PC LINK_2 header of the DSC
PowerSeries Neo panel.
Plug the adapter marked DSC PowerSeries Neo Adapter into the
PC LINK_2 header on the alarm panel. Plug the other end into
the Falcon Fusion’s serial port.
Proceed to program the panel as per the Falcon Connection &
App Set-up Guide provided, for alarm signals to be sent and/or
DSC POWERSERIES FSK KEY-BUS MODULE
The Falcon Fusion can send alarms received from the keypad-
bus of the DSC PowerSeries alarm panel.
Wire the DSC PowerSeries FSK Key-bus Module to the keypad-
bus on the alarm panel and then connect the 4-pin molex
connector to the serial port of the Falcon Fusion.
Proceed to program the panel as per the Falcon Connection &
Falcon Fusion Installation and Operation Manual
I
25