
and RING lines should be connected to the TIP and RING lines
on the Falcon Fusion.
The alarm panel must be programmed to use its dialer, and the
option for reporting must be set to Contact ID. Refer to the
programming manual of the applicable alarm panel.
3.1.6 Serial Port
The Falcon Fusion can receive alarms from the following alarm
panels on its serial port:
Ÿ
Rhino 816 and Rhino 68 alarm panels
Ÿ
Texecom Premier range (panel uploads and downloads can
also be done)
Ÿ
Paradox SP & MG Series
Ÿ
Pima
Ÿ
IDS805 & IDS X-Series
Ÿ
DSC Neo & Power Series
Ÿ
Risco LightSYS 2
3.1.7 Relay Outputs
Two dry-contact relay outputs are available on the Falcon
Fusion. These outputs can be commanded to turn on and off via
the GSM network. The outputs are rated at 24V AC or DC, up to
a maximum current of 5A.
Do not connect the relay outputs to the mains supply.
Falcon Fusion Installation and Operation Manual
I
11