No signal:
If you don’t have an image on your monitor when you turn it on, check
that you have turned on the camera.
Make sure the power indicator on the switch is on, if not, check the in-line
fuse connections.
The camera and monitor are should automatically pair, however should
the camera lose connection to the monitor for any reason, they can be
reconnected in the menu by selecting PAIR.
Picture is back to front:
The camera is designed as a front and rear facing camera, so the image
can be mirrored either way to best suit the position of you van this can be
changed by going to the menu section and switching between a true and
mirrored image.
Moisture in the camera body:
If for any reason moisture should enter the camera body, there is a
moisture drain plug on the back of the camera. Only in dry weather,
loosen the screw and turn on the camera to generate heat and release
moisture through the moisture drain hole.
Cleaning the camera:
The camera can be cleaned with a damp cloth; cleaning the lens with a
glass cleaner is also recommended.
Please DO NOT use a hose or high pressure water on the camera
as this will cause damage and void the warranty.
For further assistance,
please send an email to [email protected]
TROUBLESHOOTING
