![background image](http://html.mh-extra.com/html/falcon/fdw2002/fdw2002_user-manual_539823008.webp)
KTK
Starting the Appliance
Starting a wash cycle
- Make sure that the plug for the appliance is
inserted into the wall socket.
- Make sure that the water supply is turned on
to full pressure.
- Load the dishwasher (see the section entitled,
"Loading the Dishwasher").
- Pour in the detergent (see the section entitled,
"Salt,Dergent and Rinse Aid").
- Turn the knob located on the right of the control
panel in the clockwise direction until the number
or symbol for the cycle setting is aligned with
the reference mark (see the section entitled,
"Wash Cycle Table").
- Press the ON-OFF button,and the ON-OFF
light will turn on.At this point,the wash cycle
will begin.
Cancelling or modifying a wash
cycle setting
Press the ON-OFF button and the ON light
will turn off. Rotate the knob in the clockwise
direction to the desired cycle setting (see the
section entiled,"Starting a wash cycle...").
Then,turn the dishwasher back on using the
ON-OFF button.
At the end of the wash cycle
When the knob stops turning and is aligned
with a STOP mark(see figure),the cycle has
finished.Turn off the appliance using the ON-
OFF button,turn off the water supply and open
the door of the dishwasher.
Wait a few minutes before unloading the dish-
washer to avoid handling the dishes and uten-
sils while they are still hot and more suscep-
tible to breakage.They will also dry better.
Summary of Contents for FDW2002
Page 16: ...Installation Diagram ...