EN
1
14
Mounting the hood body
• Before attaching the hood body, tighten the two screws
Vr
lo-
cated on the hood body mounting points.
• Hook the hood body onto the screws
12a
.
• Fully tighten the support screws
12a
.
• Adjust the screws
Vr
to level the hood body.
12a
Vr
Connections
DUCTED VERSION AIR EXHAUST SYSTEM
When installing the ducted version, connect the hood to the
chimney using either a flexible or rigid pipe ø 150 or 120 mm,
the choice of which is left to the installer.
• To install a ø 120 mm air exhaust connection, insert the re-
ducer flange
9
on the hood body outlet.
• Fix the pipe in position using sufficient pipe clamps (not sup-
plied).
• Remove possible charcoal filters.
9
ø 120
ø 150
Lateral air exhaust on ducted version (connection to ex-
haust flue above wall cupboards)
• Assemble the half-shells of the hood body extension piece
14
.
• Push fit the assembled hood body extension
14
onto the air
exhaust outlet.
• Insert the deflector
16
into the air exhaust fitting
15
to close
off the unused outlet.
• Push fit connection piece
15
to the hood body
extension
piece
14
, ensuring that the free end
matches up with the opening of the required outlet duct.
• Remove any activated charcoal filters.
15
16
14
