Falcon F-Test, Owner'S Manual

Page: 5 / 25

Page | 5
Side One
1. USB Power jack. The F-Test requires some sort of power. If connected to an energized pixel string, this will
supply the power needed. If you do not have an energized pixel string connected to the F-Test, then you can
supply power through the USB port.
Side Two
1. Smart Remote Input port. This port is used to monitor the Smart Remote data that a controller is sending to the
remote receivers. If using HinksPix controllers, you will need an adapter cable, refer to the
References section.
2. DMX Input Port. This port is used to monitor DMX Signals that a controller is sending to your DMX devices. If
using Renard controllers, you will need an adapter cable, refer to the
References section.
1
1
2