E711D Convection Oven
ADDENDUM TO OPERATING INSTRUCTIONS
Falcon Foodservice Equipment
HEAD OFFICE AND WORKS
Wallace View, Hillfoots Road, Stirling. FK9 5PY. Scotland.
SERVICELINE CONTACT
t: 01438 363 000
f: 01438 369 900
T100801 Ref.1
To Operate:
1. Turn oven on by means of power ON/OFF switch
(4)
.
2. Turn oven controller on by means of ON/OFF button
(9)
.
3. Controller will display actual cooking temperature. Repeated
pressing of down arrow button
(7)
will toggle through set
temperature and time then back to actual oven temperature.
4. Press timer button
(6)
once. Pre-heat cycle will commence.
5. Oven will pre-heat to 210
⁰
C and
“Oven Ready – Load Food”
neon (2)
will illuminate. Sounder will operate. Press timer
button
(6)
twice*. NOTE: First press cancels sounder.
Second press resets time to 58 mins, ready for cook cycle.
Sounder will make 8 beeps to signify that all is OK and timer
is reset. * only press timer button
(6)
TWICE if sounder is still
audible. If silent, press ONCE only.
6. Open oven door and load food, shut door.
7. Press timer button
(6)
and countdown timer will commence.
NOTE: Pressing timer button
(6)
again will cancel timer.
8. Oven will control at a temperature of 145
⁰
C.
9. The controller sounder will beep during cook period for
1 minute at preset time for desserts to be loaded into oven.
To silence sounder during this period, press timer button
(6)
ONCE. If sounder is silent, do NOT press any button.
Open door, load desserts as quickly as possible and shut door.
10. Controller sounder will start to beep 1 minute before
countdown time is complete. press timer button
(6)
ONCE
to silence sounder.
11. When countdown time is complete, food can be
removed and served.
12. Switch OFF oven controller by means of controller
ON/OFF button
(9)
.
13. Switch OFF by means of power ON/OFF switch
(4)
.
14. If a second batch is required, repeat from instruction 1.
To Change Cook Time
(Default is 58 minutes)
With controller switched ON.
1. Press & hold timer button
(6)
for 4 seconds.
2. Hours set time will flash in display. Change by means of
up button
(8)
or down button
(7)
.
3. Press timer button
(6)
.
4. Minutes set time will flash in display. Change by means
of up button
(8)
or down button
(7)
.
5. Leave for 15 seconds. New time will be stored
automatically.
To Change Set point cook temperature
(Default is 145
⁰
C)
With controller switched ON.
1. Press Set button
(5)
.
2. Oven set point temperature will be displayed.
3. Change by means of up button
(8)
or down button
(7)
.
4. Leave for 15 seconds. New temperature will be stored
automatically.
Key to Controls Layout
1. EVCO Controller. Display shows cook
time, oven temp or oven set temp.
(Switch on default – Oven temperature)
.
2. Oven ready indicator.
Oven at preheat temp
(210
⁰
C).
3. Heat ON indicator.
4. Oven power ON/OFF switch.
5. Set button.
6. Timer button.
7. Down button.
8. Up button.
9. Controller ON/OFF button.
10. Multifunction button.
1
7
5
6
10
2
3
4
8
9