background image

12

THE DUNMORE WOOD BURNER NON BOILER STOVE

OPERATING INSTRUCTIONS

When operating and maintaining your  Stove respect
basic standards of fire safety.  Read these instruc-
tions carefully.  All relevant European and National
Standards must be complied with when installing
this appliance.  Failure to do so may result in dam-
age to persons and property.  Consult your local
Municipal office and your insurance representative
to determine what regulations are in force.  Save
these instructions for future reference.

The appliance is suitable for intermittent operation
on wood logs up to a length of 370mm.

All fuels should be stored under cover and kept as
dry as possible prior to use.

Use recommended fuels only, this product is not to
be used as an incinerator or to burn coal or liquid
fuels . The stove must be operated with the doors
closed at all times except for refuelling. 

WARNING:  This appliance is hot while in opera-
tion and retains its heat for a long period of time
after use.  Children, aged or infirm persons
should be supervised at all times and should not
be allowed to touch the hot working surfaces
while in use or until the appliance has thorough-
ly cooled.

IMPORTANT NOTES

1.  Do not burn fuel with a high moisture content, 

such as unseasoned timber. This will result in a
build up of tar in the stove and in the chimney.

2.  Clean the flue-ways of the stove weekly and 

ensure that there are no blockages. Check flue-
ways before lighting especially after a prolonged
shut down period. See baffle removal.

3.  Never allow a build up of ashes in the ash pan,

as this will cause the grate to burn out prema-
turely.

4.  Allow adequate air ventilation to ensure plenty 

of air for combustion.

5.

The chimney should be cleaned at least twice a
year by a competent engineer.

6.  Regular cleaning  of the glass will prevent per-

manent staining. Clean with soapy water when 
cool.

7.

Keep all combustible materials a safe distance 
away from unit, please see section for clear-
ances to combustibles.

8.  Do not use an aerosol spray on or near the 

stove when it is alight.

9.

This appliance is not suitable for use in a shared
flue system.

Summary of Contents for Dunmore




















Reviews: