Falcon DOMINATOR PLUS E3830, Design, Installation And Servicing Instructions, Page: 3 / 13

SECTION 1
– INSTALLATION
UNLESS OTHERWISE STATED, PARTS WHICH HAVE BEEN PROTECTED BY THE
MANUFACTURER ARE NOT TO BE ADJUSTED BY THE INSTALLER.
Please ensure that any plastic coatings are removed prior to use. Before operation, the pan
requires to be thoroughly cleaned and dried.
Discolouration of heated parts is caused by factory testing to ensure a satisfactory unit. It does
not affect quality or performance.
1.1 MODEL NUMBERS, NETT WEIGHTS and DIMENSIONS
Model
Width
(mm)
Depth
(mm)
Height
(mm)
Weight
(kg)
E3830 Fryer
300 770 890 45
E3860 Fryer
600 770 890 73
E3865 Fryer
600 770 890 85
1.2
SITING
Before connecting appliance to electricity supply, it must be correctly positioned and levelled.
Levelling is affected by turning the lower area of the adjustable legs. If desired, feet that allow
floor-fixing may be specified at time of order.
1.3
ELECTRICAL CONNECTION
The unit is designed for use on AC supplies only and terminals are arranged for either 2 phase operation
(E3830 model) or 3 phase (E3860 & E3865 models) .
Cable entry is located at appliance rear in the form of a cable gland.
A suitably rated isolating switch with contact separation of at least 3mm in all poles must be installed. All wiring
must be executed in accordance with regulations listed on title page of this document.
This appliance must be earthed.
Check that no damage has occurred to the appliance and power cable during transit. If damage has
occurred do not use the appliance.
Ensure that the mains power cable is routed free from the appliance to avoid damage.
We recommend supplementary electrical protection with the use of a type A residual current device
(RCD). Periodical testing, repair and fixing wiring connection should only be undertaken by a skilled
and competent electrician.
1.4
ELECTRICAL RATINGS
The electrical rating is stated on appliance data plate.
Model L1 L2 L3
E3830 Fryer 21.7A 21.7A
E3860 Fryer 31.7A 15.85A 31.7A
E3865 Fryer 21.7A 43.5A 21.7A