background image

INSTALLATION

 

Check the appliance is electrically safe when you have finished.

25

Dear Installer

Before you start your installation, please complete the details 

below, so that, if your customer has a problem relating to 

your installation, they will be able to contact you easily.

Safety Requirements and 
Regulations

You must be aware of the following safety requirements & 

regulations.

 

n

This cooker must be installed in accordance with 

the relevant instructions in this booklet, with the 

relevant national and local regulations, and with the 

local electricity supply companies’ requirements.

 

n

The appliance must be installed in accordance with 

the regulations in force and only in a well-ventilated 

space.

 

n

Read the instructions before installing or using this 

appliance.

 

n

This appliance is designed for domestic cooking 

only. Use for any other purpose could invalidate any 

warranty or liability claim.

Provision of Ventilation

This appliance is not connected to a combustion products 

evacuation device. Therefore, particular attention must be 

given to the relevant requirements regarding ventilation.
All rooms require a window that can be opened, or 

equivalent, while some rooms require a permanent vent in 

addition to the window. 

Location of Cooker

The cooker may be installed in a kitchen/kitchen diner but 

NOT

 in a room containing a bath or shower.

You will need the following equipment to complete the 
cooker installation satisfactorily:

• 

Multimeter (for electrical checks).

• 

Allen keys (provided in pack).

You will also need the following tools:

1. 

Steel tape measure

2. 

Cross-head screwdriver

3. 

Flat head screwdriver

4. 

Spirit level

5. 

13 mm spanner or socket wrench

Checking the Parts:

Grill pan and trivet

2 flat shelves

Griddle (Optional)

1 drop shelf

Tall oven shelves and shelf 

supports

1-piece plinth

ArtNo.000-0010 Tall oven shelves

ArtNo.350-0008 - 90 SC plinth

8.  Installation

ArtNo.050-0011 - Installer information table

Installer’s Name

Appliance Serial Number

Installer’s Telephone Number

Installer’s Company

Summary of Contents for 900 Deluxe Induction









































Reviews: