3.
Begin by holding the door up to the frame and attach it using the double-sided Velcro strips sewn
perpendicular to the edge of the door. At each of the double-sided strips take one of the 3" adhesive
Velcro strips and adhere it to the inside of the frame. Then wrap the double-sided strip around it so that
the adhesive strip holds it firmly in place. The following diagrams show how it should look.
4.
Next take the 38" adhesive Velcro strips and run it down the back of the roll cage facing towards the
rear of the vehicle. Start at the bottom and work your way up the bar. You will see the double-sided
Velcro tabs sewn along the back of the doors. See photos below.
