STEPPII
GETTING STARTED
V
ERSION
1.03
On the appeared dialog box select the check box captioned
”send line ends with
line feeds”,
click on
OK
button
and close the opened dialog box
.
Figure 8:
Change the default setting
Now open a text file (
txt
extended file) and write
“
$PFAL,Cnf.Set.GSM.PIN=3333
”
command which has to be sent to the STEPPII terminal (e.g see the figure below).
The value “
3333
” of PIN parameter has to correspond to the PIN number of your SIM
Card, which is provided by your mobile phone service provider. Please note that,
after the command is written, press the
enter
key to complete the command
(<CR><LF>), else the command will be ignored from the STEPPII terminal. Save the
opened file, for example “example .txt” and then close it. Please, remember file
directory. Note that, this command is available using the firmware version “2.3.xx”,
only. Using the firmware version “1.6.xx” please refare to a separate manual, see
related documents
[6]
.
Figure 9:
Write the command on the text file.
In order to sent the command to the terminal you have to tranfer the saved text file
with included command. Click the
Transfer
on the Hyperterminal menu and select
Send text file...
.
This confidential document is the property of FALCOM GmbH and may not be copied or circulated without permission.
Page 9
