Lumina 17
System
17
4.2
SD Card Menu
The set data and the operating program in the control computer can be transferred to an SD-card. This data can be
copied back onto the control computer from the SD-card. This must only be performed by an authorised installer,
except when backups are made.
Place the SD-card in the SD holder on the FUNC (CPU).
SYSTEM
SD Card Menu
Backup data
Backup data writes all the data set in the control computer to the SD-card (type .FBU). A
service engineer may require this data so the settings can be checked on a different
control computer.
Restore data
Restore data re-loads saved data from the SD-card back onto the control computer (type
.FBU).
Data saved on one control computer can only be loaded into another control
computer if both computers are of the same type. In addition, the set control
computer numbers must be identical. If both these conditions are not met,
loading will fail.
Backup FUNC
Backup FUNC
writes a copy of the operating system (type .FIN) from the control
computer to the SD-card.
Update FUNC
Update FUNC
loads an operating system (type .FIN) from the SD-card onto the control
computer. Select the required file using the + en – keys on the alpha-numeric keyboard.
Confirm using the ENTER key.
Update HI
Update HI
(HI = Human Interface) loads an operating system (type .HIN) for the keyboard
and the screen from the SD-card onto the control computer. Select the required file using
the + en – keys on the alpha-numeric keyboard. Confirm using the ENTER key.
