1. Safety standards
Please carefully read the instructions below before installing the awning to avoid electric
shocks, laceration, etc.
While installing the electric awning blind it is essential to comply with the following rules:
Firstly, after unpacking, check that the awning blind does not show any signs of
mechanical damage.
Installation should be performed by a qualified person according to the producer’s user
manual.
Before connecting the awning blind, make sure that the supporting voltage is compatible
with the voltage of the awning blind mentioned on the rated plate.
Plastic containers used for packing should be kept out of children’s reach as they pose a
potential threat.
The awning blind should be used only for its purpose. FAKRO is not responsible for any
damage of the awning blind resulting from improper use.
Any actions related to cleaning, adjusting or disassembling of the electric awning should
be preceded by disconnecting the power supply.
Do not use any solvent-like agents, or a water jet (do not dip in water).
All repairs should be made by a service authorized by the producer.
The awning blind is for external use only.
02.03.18 NC97B-GB 2/8 ©2018, FAKRO
