9
The Extended Functions Menu provides three logically grouped sub-menus:
Heater Menu:
Settings related to the heater or coil
Mod Menu:
Settings related to the individual usage and appearance
Value Menu:
Provides several statistics of vaping
The Extended Functions Menu offers a lot of setting options of the mod, to provide the highest possible flexibility for the user to individually
adjust it to whatever preferences. Normally, once the settings were made, the user will need to change the parameter rarely. In order to
keep the main menu as short as possible, the extended functions menu was created.
The many options may frighten some of the users initially. But without the extended functions menu the mod would not be able to address
all different customer requirements. Please take a bit of time to get familiar with the menu. We are sure, as soon as you have gained an
overview, the individual setup is a walk-over.
In the standard operation mode, the wattage selected in the power setting menu is applied to the coil, unless the set voltage would be
greater than 10V or the set current would be greater than 20A, which depends on the coil resistance.
For example with a coil resistance of 4 Ohms and a power setting of 40W, the required voltage at the coil is 12.7V. With 4 Ohms the max-
imum wattage is 25W ((12V)²/4R=25W). Or, if the coil resistance is 0.1Ohm the maximum power is 40W, because (20A)²*0.1Ohm=40W.
As can be seen from the examples, with high coil resistance the power is limited by the maximum voltage of 10V and with low resistances
by the maximum current of 20A.
A power of 60W is guaranteed from 0.2 to 1.6 Ohms. Resistances of 0.05 to 5 Ohms are possible but with a reduced power.
*1 ) The temperature coefficient selects the type of wire material, range 050 to 650: When TC-mode is selected (Main menu HCtrl=1), the
user must select the wire type to be NiFe30 (dicodes wire), Ni200, Titanium, Tungsten (Wolfram), Stainless Steel (Inox) or “Other”. The
value for “Other” is adjusted here. The values of the redefined wire-types are 320=dicodes-wire, 620=Nickel, about 105=Stainless Steel,
50=Titanium (varying literature values, danger: fire hazard), 440=Tungsten (Wolfram). Value to select = Literature value*10E5 K. Example:
Ni 6.2E-3*1/K * 10E5*K => 620
7.
Extended Functions Menu
7.1 Heater Menu
Summary of Contents for Illusia C
Page 1: ...ILLUSIA C USER MANUAL ...
