Only use the trimmer to remove hair from the areas
listed. Do not insert the trimmer more than 0.5 cm
into the ear or nostril. Risk of injury. Switch off after
use.
WARNING!
18
ULTRACARE
GB
Trimming nose/ear hair:
The nose/ear hair trimmer is used to trim hair from the nostrils and ears.
1. Fit the nose/ear trimmer attachment and Switch on the groomer.
(C)
2. Place the tip of the Nose/Ear trimmer head assembly against the protruding hairs of
the nostrils or ears to cut and remove.
Sideburn trimmer - trim to length
The Sideburn trimmer attachment is used with the adjustable comb fitted to trim
sideburns to an even length.
1. Fit the Sideburn trimmer attachment.
(D)
2. Slide the comb into the groove on the Sideburn trimmer.
(E)
The comb has three
click-stops in the groove, so can be adjusted for different cutting
lengths.(2mm-3mm-4mm). Push the comb fully onto the trimmer to cut to 2mm
cutting length. Move out by one click for 3mm. Move out by two clicks for 4mm.
3. Switch on the groomer.
4. Gently move the groomer across the skin as shown, against the direction of hair
growth.
(F)
The hair will be trimmed to length.
The sideburn trimmer attachment can be used without the comb fitted to trim sideburn
edges etc.
• Follow the instructions in the previous section, but without fitting the comb.
The groomer will now remove all hair in its path.
Face shaver
The face shaver will remove hair and make smooth.
1. Fit the shaver attachment.
2. Switch on the groomer.
(G)
3. Draw the shaver across the skin, against the direction of hair growth.
4. You can use your other hand to stretch the skin slightly to get a closer shave.
To shave where there is longer hair growth, use
the trimmer to trim the hair initially, then use the
face shaver to finish.
NOTE!
