Fakir TECHNOSPHERE Smart, User Manual, Page: 50 / 128

50
EN
Odours are
not removed
properly
Environmental factors
You may be using the appliance in an
environment with a poor air quality.
Reinforce air circulation by opening the
windows.
Place the appliance in a smaller room.
Recommended room sizes are between
50 m2 and 100 m2.
You may be using the appliance in a
room larger than the proper sized room.
Fans are not
operating
although the
appliance is
plugged and
turned on
Appliance may be faulty.
Turn off and unplug the appliance.
Consult Fakir Authorised Service.
The Clean Cell
appears in red
on the display
It may derive from the
collector cell.
Clean the collector cell and press and
hold the sleep icon for 3 seconds and
you will see the clean cell indicator
disappear from the display
The plasma
indicator does
not operate
A large piece may be entered
the collector cell. Check and remove if any and restart
your machine
The collector cell may not be
installed properly
Try placing it again
The collector cell may be too
dirty or may not be cleaned Check the cell and clean it, replace it if
damaged.
The collector
cell cannot filter
the particles
The collector cell may not be
dried enough after cleaning Make sure again that it is dried
completely.
It may derive from the
collector cell.
Clean the collector cell
The collector cell may be
defective and damaged In this case, contact the nearest Fakir
Authorised Service.
The automatic
indicator
flashes
It may derive from the
environmental factor. If the air quality is poor, ensure air flow
by the opening windows
Sensor may be faulty.
In this case, call the authorised service
for repair or replace it with a new one