41
EN
5) Sleep Mode
When the sleep mode button is pressed, display switches to the lowest brightness level.
The appliance switches to the lowest operation mode and continues to run on quiet mode.
Press this button again to cancel this mode.
NOTE!
Other buttons are not active in this mode. Cancel by pressing the sleep mode button first.
6 ) CLEANING INDICATOR-Clean Cell
We recommend you to clean the appliance when CLEAN CELL message is displayed on the
screen. Place the collector cell into its place after cleaning. Turn on the appliance.
Press and hold the sleep button E
for 3 seconds. The CLEAN CELL message on the
screen shall disappear.
7) PM 2.5 Indicator Function
PM 2.5 is a fine particle that cannot be seen with the human eye, which is about 3% the
size of a human hair. These particles, called PM 2.5, may originate from various sources.
These include power plants, factories, motor vehicles and aircraft fuel residues, wood and
coal use in households, forest fires, agricultural burnings, volcanic eruptions and dust
storms. Unfortunately, our body’s own filtering system is not effective in preventing these fine
particles. Your appliance is able to filter and eliminate the particles up to 0.1 microns. When
the appliance starts to operate, the PM 2.5 indicator will automatically turn on next to the
timer on the screen. Values begin to decrease with the increase of air quality.
NOTE!
The value may increase when window is opened
8) PLASMA Indicator Function
If the plasma light (J) is illuminated on the display (on position), it means that your collector
cell is working normally, if the indicator is disappeared (off position), check your collector cell
and clean it again if necessary.
Summary of Contents for TECHNOSPHERE Smart
Page 2: ...Deutsch 3 English 29 Türkçe 53 Ɋɭɫɫɤɢɣ 77 ΔϳΑέόϟ 103 ...
Page 125: ...127 127 6 ...