Fakir Steam Mop, Manual

Page: 20 / 36

Quick Start
When assembling your steam mop there
may be a little water in or around the
water tank. This is because we test all
our steam mops 100% before you buy
them, so you get a quality
Fakir® Steam Mop.
ASSEMBLE
Insert the mop handle into the
pump actuator (the tube that
leads to the tank). Push the mop
handle and pump actuator
together in until you hear it click
into place.
Select a mop head and cleaning
pad. Fit one side of the pocket
onto the head first, then using the
lavender loop, pull the pocket
over the head. Attach the quick
fasteners on the top of the pocket
to secure in place.
Snap the mop head into the base
to secure it. Press the release
button to exchange mop heads.
FILL
Lay the mop on the floor or on a
counter top and remove the water
tank cap by turning counter
clockwise. Fill the water tank
using the filling flask. Do not
overfill the water tank. Replace
the water cap and tighten.
IMPORTANT: Make sure your
floors are sealed. Before using
the Steam Mop consult page 4
for more information.
1-
2-
3-
4-
4
3
2
1