Fakir prestige VC 29, Operating Instructions Manual

Page: 30 / 40

• Place the rear protective
grille [B] with the three
round recesses precisely
onto the three knobs –
two above and one
below the motor axle
[A] – on the motor
head and secure tightly
(clockwise) with the
large nut [C].
• Insert fan blades [D] all the way onto the
motor axle [A]. First remove any protective tube.
• Screw the cap nut [E] onto the motor axle [A] to
secure the fan blade. Left-handed thread!
Screw on the nut counter-clockwise.
• Unscrew the recessed head screw on the front
protective grille [E]. Fold safety lever downwards.
• Put front protective grille [F] with the clamping ring
(screw facing downwards) onto the rear protective
grille [B] and push on.
Push safety lever upwards onto the grille and secure
with the recessed head screw.
• Insert the tube [L] precisely into the base foot / nozzle
plate [M] and screw [N] securely from below (clock-
wise).
• Pull the telescopic tube [J] out of the tube [L] and
secure by rotating the knurled screw [K] to the right
(clockwise).
• Put the cooling fan with the foot base [G] all the
way onto the telescopic tube [J] and use the knurled
screw [H] to secure it by turning it to the right
(clockwise).
10
Zusammenbau VC 45 S
A F E D C B
K
J
L
M
N
H
G
NOTICE!
Make sure that the grille snaps into place all the way
around.

Assembly en