Fakir prestige VC 29, Operating Instructions Manual

Page: 29 / 40

• Insert the base plate [A] of the cooling fan with the
snap-in nose into the rear opening [B] of the nozzle
plate [C], then press down and secure from below
with the large nut [D].
• Place the rear protective grille [H] with the guiding
tubes precisely onto the three recesses (one above
and two below the motor axle) on the motor head
and secure tightly (clockwise) with the large nut [G].
• Insert fan blades [F] all the way onto the motor
axle [J]. Ensure that the tension spring is on the
fan blade hub. First remove any protective tube on
the axle.
• Unscrew the recessed head screw on the front
protective grille [E]. Fold safety lever downwards.
• Put front protective grille
[E] with the clamping ring
(screw joint facing down-
wards) onto the rear protec-
tive grille [H] and push on,
push safety lever upwards
onto the grille and secure
with the recessed head
screw.
9
E F G H J
A
C
D
B
Assembly of the VC 29
NOTICE!
Make sure that the grille snaps into place all the way
around.

WARNING!
Never use a defective appliance.
WARNING!
Prior to assembly, make sure that the mains
plug is unplugged. If the mains plug is
plugged in, the appliance could accidentally
be switched on, resulting in injuries.
Assembly en