Fakir prestige AC 9, User Manual, Page: 34 / 104

34
EN
Selection of swing mode
3. „SWING“. Press this button, the vertical wind direction
vanes can rotate automatically, when you have the desired horizontal wind direction,
press it again, the vertical wind di- rection vanes will be stopped at the situation of your
choice.
Selection of turbo mode
4. „TURBO“. Only under the state of cooling or heating mode, press this button, the fan
speed is adjusted to strong automatically and the LCD displays ‘’TURBO ‘’, the ‘’TURBO”
function is started to reach the highest cooling or heating.
NOTE!
Turbo function is not available during room atmosphere
Timer mode
5. „TIMER“.
Setting the ‘’ON”timer time:
a. When remote controller is at off state, press ‘’TIMER” button, the LCD displays
‘’TIMER ON” and the timer time, the range of setting time is 0 .5h to 24 h.
b. You can press the ‘’L. “ or “ v” button to adjust the timer time, each tauch will be set
time to increase or
reduce 0.5h before 10 hours ago, after ten hours will be set time to increase or reduce
1h per pressing, to enables your required timer.
c. Press ‘’TIMER “ button again, to set the timer an functi- on.
d. You can set another function to insure the suitable state after air conditioner turn
on (including mode, temperature, swing, fan speed and etc). The LCD will displays all
your setting and keep it, when the timer reach to the set time, the air conditioner will be
working according to your set au- tomatically.
Setting the ‘’OFF “ timer time:
a. When remote controller is at on state, press ‘’TIMER” button, the LCD displays
‘’TIMER OFF” and the timer time, the range of setting time is 0,5h to 24 h.
b. You can press the ‘’L. “ or ‘’ v “ button to adjust the timer time, each touch will be set
time to increase or reduce 0,5 h before 10 hours ago, after ten hours will be set time to
increase or reduce 1h per pressing, to enable your required timer.
c. Press ‘’TIMER “ button again, to set the timer off function.
Display
6. „DISPLAY“.
You can let the LCD display working or not by pressing this button.
Selection of temperatur
7. „
“ und „ “ Buttons
Press this buttons ,you can set the temperature range from 16°C to 32°C , Display will
change when you touch the button.