LAGOON
GB
27
CAUTION!
Under normal conditions your appliance's flow rate is 3
L/min. Therefore, the flow rate of the water flowing out
from your appliance should be adjusted as 3L/min.
So ∆t is 30ºC at your appliance.
In other words (At the max. position) the cold water that
comes to your appliance as 10°C flows out from it as
40°C hot water. The temperature level will change as
long as the water flow rate increases.
To achieve the desired hot water you can adjust the
flow rate by turning down or up the inlet water tap
according to the seasonal conditions.
USAGE OF THE ELECTRIC INSTANT WATER HEATER
• Check the power and water connections before starting up your appliance.
• Turn on the inlet tap and wait until the tank gets full.
• It means the tank is full when water flows out from the instant water heater.
• At this stage the temperature of the water could be adjusted by turning the adjusting
key to the desired level.
• Do not turn down the inlet water excessively.
• When turning off the instant water heater, turn the adjusting key to ( 0 ) position.
• Wait until the hot water in the appliance is fully drained.
• When cold water starts to flow out from the instant water heater turn off the tap.
• This will reduce the calcification of your appliance.
