LAGOON
GB
25
MOUNTING THE SHOWER ACCESSORIES
• Drill two holes (Ø 8 mm) on a suitable place in order to mount the shower head of the
water heater.
• Fix the shower head after inserting the dowels to holes.
• As the shower head rack can be turned; you can adjust the shower head in up and
down direction.
INSTALLATION OF THE INSTANT WATER HEATER TO THE SHOWER
ACCESSORY
• Using two spiral hoses supplied with instant water heater, attach the shower head
accessory to electrical instant water heater and attach other hose's 3/4" nozzle to tap
outlet and attach its 1/2" nozzle to electrical instant water heater.
• Complete the installations using the rubber gaskets supplied with the accessories.
• Never use a shower head other than the one supplied with the appliance.
POWER CONNECTION
• Operating voltage and frequency of the instant water heater is AC230V–50 Hz.
• Power of the instant water heater is 7000W.
• Building's electric system must be arranged in accordance with 7000W.
• Adapting the electric system and plumbing in accordance with the appliance is
responsibility of the consumer.
• Earthing must be done, the appliance should not be used in buildings which have
inadequate or improper earthing or which have not earthing at all.
• Our firm will not be responsible of any problems caused by the related subject in the
contrary case.
CAUTION!
The shower head should be located and used so as not to
be in a location higher than the bottom part of the device.
