LAGOON
GB
24
ADJUSTING KEY (WATER TEMPERATURE ADJUSTING KEY)
This key is used to turn on and off the electric water heater and adjust the water
temperature level.
There are three levels, 3000W, 4000W and 7000W. You can adjust the key due to the
desired water temperature level.
0 - NO HEATING ( Appliance is turned off )
I - 3000W
II - 4000W
III - 7000W
WARNING LAMPS
There are three warning lamps on the instant water heater. These lamps show the
current water temperature level and whether there is voltage or not.
N – AUTOMATIC SWITCH
N-Automatic Switch works as a key, when it is switched off, the instant water heater's
electrical contact with the electric network is disconnected.
This switch should not be mounted in the fuse panel; it should be mounted near the
product.
DIAPHRAGM SWITCH
In case of inadequate water flow rate, it is automatically activated and turns off the
power supply of the instant water heater.
When sufficient water flow rate is obtained, it provides precise safety by enabling the
electrical circuit of the appliance.
RESISTANCE TO WATER FLOW RATE
Instant water heater has been tested under 6 bar flow rate by taking the city water
supply flow rate into consideration.
MOUNTING THE APPLIANCE ON THE WALL
• Make sure the surface of wall on which the instant water heater will be mounted is
smooth.
• Using the instant water heater mounting template given in Annex, mark the locations
of dowels on the wall.
• Drill 4 holes fit for the dowels. (Ø 8 mm).
• Place the dowels into the holes and mount the back panel of the appliance on the wall
using the screws.
• Close the front cover of the instant water heater after completing the electrical
connections.
