10
• pressing the cord re-wind button (1) pull
the cord out of the casing and insert the
plug into power socket.
• Start the vacuum cleaner up pressing the
On-Off button (1)
SUCTION POWER REGULATION
You can adjust the suction power to suit
the type of flor being cleaned. Use the
symbols on the suction power display as a
guideline.
• Curtains, textiles ( lowest setting)
• Upholstery, cushions
• High-class carpets, rugs and runners
slightly soiled carpets and hard floors
• Heavily soiled carpets and hard floors with
coarse dirt (highest setting)
To set the desired power setting, pres the
+ button (2) or the – button (1) several times
until the desired setting lights up on the
suction power display.
Accessories
Soft surface cleaning – carpets and floor
coverings: we recommend you to use
nozzle-brush for carpets. Fit the nozzle-
brush with the tube and switch it to carpet
clearing function: with hidden brush (press
the switch on the nozzle-brush according
to the drawing).
Hard surface cleaning – wooden floor, PVC
floor, ceramic tiles, etc.: we recommend
you to use nozzle-brush for such floor. Stick
out the brush (press the switch on the
nozzle-brush with a drawing ). You can find
nozzles for furniture, gaps and upholstery
in accessories compartment (9) located
inside the vacuum cleaner. You can fit them
in extension tube inlet or hose inlet. Open
the compartment lid and take out a nozzle
or a brush.
Vacuuming delicate material and rough
objects:
Small brush is used for vacuuming: libraries,
picture frames and windows. We
recommend reducing suction power during
such activity.
Vacuuming gaps, corners, cavities, etc.:
Gap nozzle is used for vacuuming: gaps,
corners, spaces and other recesses with
difficult access.
You can place each of a/m brushes or
nozzles inside the hose handle. In such
case it is „handy always ready for use.
Dustbag Replacing
Dust bag replacing is necessary when you
notice that:
1. Filter indicator is red,
2. Suction is significantly lower,
3. Dust bag is full.
