26
EN
Removing the cylinder filter
MAX
40˚C
CAUTION!
We recommend that you empty the dust tank after each use to ensure that your
appliance performs at high level.
NOTE!
Always operate your vacuum cleaner with the dust tank attached.
2. Motor Protection Filter Cleaning and Maintenance Instructions
1. Remove the motor protection filter under the dust tank slowly and carefully as shown
below.
2. Pull and separate the black sponge filter / white felt filter.
3. Shake the filters dirty side facing down before and wash them gently under water. Water
temperature must be max. 40°C
4. Once you make sure that black sponge filter / white felt filter are dry, install the motor
protection filter on the appliance.
TAP
MAX
40˚C
TAP
MAX
40˚C
24
CAUTION!
Sponge filter and felt filter should NEVER be rubbed while washing and should not be
sun dried.
It should not be reinserted into its place unless you are sure that it is completely dry.
NOTE!
Make sure the motor protection filter and HEPA 12 filter are clean to make your
appliance work with maximum performance.
