is provided for the cleaning of furniture,
pictures etc.
Textile Filter
- The textile filter is a long-life filter which
like the paper filter serves as an additional filter for the
removal of fine dry dust or similar.
Foam Plastic Filter
- The foam plastic filter should be
installed when the appliance is used for extraction cleaning
or a mixture of liquid and dirt or waste matter is to be
picked up.
Assembling the Appliance
A- Suction Hose
- Fuse the rotary sleeve
of the suction hose into the intake socket
in the canister until it locks home. Pull the
release button on the intake socket and
pull out the suction hose.
B- Suction Tubes
- Insert the pin in the
housing of extension tubes to connect
them. After having connected the two
parts of the tubes turn the lever of the
pin on the position "closed". Carry out the
same operation to connect the extension
tubes to the handle and to the integrated
connection piece.
C- Nozzles
- All the accessories can be
connected to the handle and to the
extension tubes.
D- Swiveling Floor Nozzle
- The swiveling floor nozzle
provides for the vacuum
cleaning of carpeted floors
of all kinds also smooth
floors with no change of
nozzle. Adjustment to the
respective type of floor is
effected by operating the
foot switch on the nozzle: Carpeted floors bristles retracted.
Smooth floor bristles extended.
E- Crevice Nozzle
- The crevice nozzle
permits the efficient cleaning of cracks
folds, recesses and other awkward places.
F- Upholstery Nozzle
- The use of the
upholstery nozzle is recommended for the
cleaning of upholstery, mattresses, car
seats etc. It is also suitable for the removal
of small spills of water.
Dry Vacuum Cleaning
Having selected and installed the desired
accessory, check to ensure that the interior
of the appliance
(A)
and all the accessory
compenents are dry.
• Unwind the mains lead and install the
plug into the power socket.
• Switch on the appliance by lightly pressing the ON/OFF
switch.
B- Suction Power Control
- An air intake
control is located in the handle of the
suction hose with which you can reduce
the suction power if e.g. the carpet or
mat lifts from the floor under excessive
suction power. For Max. Suction Power
- Push control slide forward (aperture in handle closed).
For Min. Suction Power - Push the control slide to the rear
(aperture in handle open).
Wet Vacuum Cleaning
C-
Release the canister clamps, remove
hood, filter cartridge and paper filter if
fitted. To remove the filter, turn the filter
retaining clip anticlockwise and pull off
the filter cartridge togeher with the base
plate.
D- Foam Plastic Filter
- Install the foam
plastic filter if it is intended to remove a
mixture of liquid and dirt or waste matter.
To do this, push the filter on to the float
valve retainer as far as it will go. Slightly
contaminated water can be removed without installing
the foam plastic filter. Place the hood an the canister,
fasten the canister clamp and install the desired cleaning
accessory.
• Unwind the mains lead and install the plug into the
power socket.
• Switch on the appliance by light pressure on the On/OFF
switch.
02
