Fakir Atomic, User Manual

Page: 18 / 52

18
EN
Introducing the Appliance
1. Power Button
2. Motor section
3. Bowl cover
4. Bowl
5. Chopper blade
6. Anti slip base
1
2
3
4
6
5
Technical Data
• Power
: 500-600W
• Voltage : 220-240 V AC, 50-60 Hz
• Protection Class : II
• Lifetime: 7 years
Installing and Uninstalling the Appliance:
The appliance must be unplugged before the parts of the appliance are being installed
and uninstalled.
• First, place the bowl on a flat, hard floor.
• Place the chopper blade in the turning shaft on the bottom of the bowl.
• Place the chopper’s lid on the chopper.
• Place the engine compartment in the slot on the bowl cover and make sure that it is
fully seated.
• To disassemble your device, first unplug the device.
After unplugging it, follow the procedures above from backwards.
Use of The Appliance
Before using your appliance for the first time, hand-wash the bowl and blade in soap
water. Then rinse them. Then mount the parts on the appliance.
Plug in the appliance.
Press the start button on the engine compartment to start the appliance.
When the process is over, remove your hand from the button.