____________________________________________________________________________
- 39 -
3.
Set “IP”, press
to confirm;
4.
Set “S-Mask”, press
to confirm;
5.
Set “Baud”, select from 4800/9600/19200/38400/115200, press
to confirm;
6.
Set “Parity”, select from None/Odd/Even, press
to confirm.
7.
Restart the power supply for changes to take effect.
----------------------------------------------------------------------------------------------------------------------
After modifying the configuration, you need to restart the power supply for changes to
take effect.
----------------------------------------------------------------------------------------------------------------------
4.3 Communication Protocol
4.3.1 SCPI Protocol
For specific content of SCPI protocol, please refer to "FTP3000 Programming Manual SCPI Edition".
4.3.2 Modbus Protocol
For specific content of Modbus protocol, please refer to "FTP3000 Programming Manual Modbus Edition"
----------------------------------------------------------------------------------------------------------------------
FTP3000 series DC power supply support Modbus-RTU only.
----------------------------------------------------------------------------------------------------------------------
4.3.3 CANopen protocol
For specific content of CANopen protocol, please refer to "FTP3000 Programming Manual CANopen Edition"
Summary of Contents for FTP3000 Series
Page 2: ......
