1. Depending on the proximity of electrical wiring or
pipes to the wall surface, the unit may detect
them in the same manner as studs.
Caution should always be used when nailing,
sawing, or drilling into walls, floors, and ceilings
that may contain wiring or pipes.
2. When working near electrical wires, always turn
off the mains power.
3. To avoid unexpected problems please be aware
that different types of material may be close
together. A stud, joist, pipe, metal object or wire
may be adjacent to each other.
4. If you do not intend to use the detector for an
extended time, please remove the battery before
storage.
5. For an accurate locating result, it is recommended
that user repeats the detection scan around the
detected object in different directions.
6. Shielded wires or live wires encased in metal
conduits, casings, metal walls or thick, dense
walls will not be detected.
10
NOTE
