Fairywill P80S, Instruction Manual

Page: 4 / 35

4

If the pressure is too hard against users’ teeth, the pressure indicator light will turn on in
Red to remind the users to be careful when cleaning or change to a suitable mode of their
own.

The brush has a 2 minute smart timer as this is recommended by dentists as the optimal
time for brushing the teeth and there is interval pausing after every 30 seconds as a
reminder to move to another quadrant of the mouth.

Move to the next section when you feel the pause and the toothbrush will automatically
power off after 2 minutes.

To avoid splashing toothpaste, only turn on the toothbrush after you have placed it against
your teeth and only remove it from the mouth after it is turned off.
Notes:
1. When the phone device and the toothbrush are disconnected after the brushing process
complete, the toothbrush’s Bluetooth function will go into a standby hibernation if it is in a
non-use status for a long time. It can reduce power consumption and extend battery life in this
status. The Bluetooth function will awake when users raise the toothbrush again. If it is not
awakened, please press the power button to check whether the power is sufficient or not;
2. Bluetooth Connection Steps:
1) Search: Start the "Fairywill" APP on the phone, add or search for the toothbrush devices,
click on the toothbrush device that found on the phone to associate and connect (please place
the toothbrush device and the mobile phone in the effective range)
2) Connect: When the toothbrush device is in the connecting process, the Bluetooth indicator
flashes in White, keep pressing the power button of the toothbrush for connection until it is
finished;
3) Successful Connection: After the connection is completed, you can modify the device name
and set the brush head information, etc.
☆
Changing the toothbrush head

Install: Slide the toothbrush head down toward the handle. Please make sure it is in the
correct position.

Detach: Firmly hold the base then, pull the toothbrush head out away from the handle.
☆
Charging the toothbrush

If the toothbrush is in low battery condition when turning it on for the first time, please
ensure it is fully charged before usage.
 If the toothbrush is not in use for more than 3 months, please fully charge it according to
the charging instructions before using it.